PE Jaw Crusher

PE series jaw crusher

PE Jaw Crusher You Deserve It

PE Jaw Crusher is one of our main products,which designed by engineers with large reduction ratio,even granularity,simple structure,reliable operation,convenient maintenance,low cost.

We have 6 different models, which can meet most crushing requirements in primary and secondary crushing. Flexible discharge opening setting of jaw crusher allows perfect match with relative equipments. They are have good performance in the stone crushing plant.

Three Different Types Of PE Jaw Crusher

PE jaw crusher is mainly used for the primary crushing in the mining, building materials, construction and other industries.

According to the feed mouth width size is divided into large, medium and small three types. Feeding port width larger than 600MM as large machines, feeding port width in 300-600MM as medium-sized machine, feeding port width less than 300MM for small-size machine.

Australia 200 tph stone crushing plant

Successful Case

Australia 200 tph Stone Crushing Plant

Raw Material: limestone

Feed Size:500-600mm

Capacity: 200TPH

Read More

Lubrication And Maintenance Of PE Jaw Crusher

The practical application of scientific and rational methods of operation, you can not only extend the life of crusher but also increase productivity.

Lubrication The Machine

  1. Constant pay attention to and make friction surface lubrication work, which can ensures the normal operation of the machine and to extend its service life.
  2. Jaw Crusher used grease shall be based on use of locations, and subject to the conditions of temperature, typically calcium, sodium-calcium and sodium based grease.
  3. Before run the machine, bearing thrust plate and thrust plate should inject the right amount of grease.


  1. Minor repairs to main contents include check and fix adjustment device, adjust the discharge gate gap, turn or replace the wear liner. Check transmission parts, lubricating system for lubricating oil and so on. About repair cycle for 1-3 months.
  2. In addition to the repair work, also includes replacing the thrust plate, liners, inspect and repair the bearing. Cycle is generally around 1-2 years.
  3. Overhaul in addition to repairing works, also include the turning of eccentric shaft and replaced and jaw mandrels, casting stub top of babbit, replacement or repair of worn parts. Overhaul cycles normally last for 5 years or so.

Working Principle Of PE Jaw Crusher

Do you konw how does the pe jaw crusher work? This machine is driven by motor,the motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surrounding the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw.

The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down; the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, and the products after crushing will be discharged from the outlet of Jaw Crusher.

jaw crusher working principle

7 Innovative Features

  • Low noise, less dust.
  • The application of world-class manufacturing processes and high-tech materials;
  • Integrated steel structures are used for the base of bearing;
  • The crushing chamber uses "V"-shaped structure, so that the feeding size equal to the nominal one;
  • The crushing chamber is deep and without dead zone, increases the capacity and the output;
  • The outlet employs shim adjustment system, convenient and increase the flexibility of it;
  • The lubricating system is safe and reliable,which makes it easier to replace components.

PE Jaw Crusher Related Knowledge:

  1. Jaw Crusher Broken Material
  2. Feldspar Stone Crushing Plant
  3. How To Choose The Jaw Crusher
  4. Cement Manufacturing Process Flow Chart

Technical Data

PE Series Jaw Crusher
Model Feed Opening (mm) Max Feeding (mm) Discharge Opening (mm) Capacity (t/h) REV (r/min) Power (kw) Motor Model Machine Size (mm)
PE200×350 200×350 170 20-50 2-6 220 6-7.5 Y160M-6/7.5
PE250×400 250×400 210 20-60 5-20 310 6-15 Y180L-6/15 1450×1315×1296
PE250×750 250×750 210 20-60 8-22 320 6-30 Y225M-6/30
PE500×750 500×750 425 50-100 45-100 275 6-55 Y280M-6/55 1890×1916×1870
PE600×900 600×900 500 65-160 70-120 250 6-75 Y315S-6/75 2520×1840×2303
PE750×1060 750×1060 630 80-140 130-260 250 8-90 Y315L1-8/90 2620×2302×3110
PE900×1200 900×1200 750 95-165 220-380 200 8-130 JR127-8/130 3789×2826×3025
PE1000×1200 1000×1200 850 195-265 230-380 200 8-130 JR127-8/130 3889×2826×3025
PE1200×1500 1200×1500 1020 150-300 400-800 220 8-200 YR355M4-8/200 4930×3150×3700

Related Crusher Machine: